K-9503 Sulfide

K-9503 Sulfide Vacu-Vials Kit is used to determine Sulfide levels from 0-3.00 ppm.

Sulfide information

This kit requires the use of a CHEMetrics Direct-Readout Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell. Instrument sold separately. 

$38.50
2-5 Business Days

Why Choose Vacu-vials?

CHEMetrics Vacu-vials self-filling ampoules are a great way to test for dissolved substances in liquid. Unlike our visual test kits, the Vacu-vials test kit allows you to obtain an instrumental result using the CHEMetrics Direct-Redout Photometers or any spectrophotometer capable of accepting a 13m diameter round cell. When using equipment from another manufacturer, set the spectrophotometer to absorbance mode, select the wavelength specified by the Vacu-vials kit instructions, and follow the test procedure. The K-9503 Sulfide Kit was designed to accurately measure the levels of Sulfide in water from 0-3.00 ppm.

Safe and Reliable Results:

While traditional methods often require multiple steps and thorough preparation, these test kits allow you to obtain dependable results with a few simple steps. By simplifying the testing method, Vacuvials test kits reduce the potential for operator error. Additionally, each of the ampoules contained in the test kits is vacuum sealed which helps eliminate the problem of obtaining inaccurate results from stale or unstable reagents. These reagents are stored right in the tip of each ampoule and sealed in glass, thereby minimizing direct contact with the chemicals.

What's Included:

     -30 self-filling Ampoules

     -25 mL Sample Cup

     -Activator Solution

     -Ampoule Blank

     -Instruction Manual

Method:

K-9503 uses the Methylene Blue Method. CHEMetrics test kits measure total acid-soluble sulfides and employ the methylene blue methodology. Sulfides react with dimethyl-p-phenylenediamine in the presence of ferric chloride to produce methylene blue. Results are expressed as ppm (mg/L) S.

 

How to Use:

1. Fill the sample cup to the 25 mL mark with the sample to be tested. 2. Add 5 drops of the Activator Solution. Stir to mix the contents of the cup.
3. Immediately place the Vacu-vial ampoule tip-first into the sample cup. Snap the tip and the ampoule will automatically fill. 4. To mix the ampoule, tilt it from side to side, allowing the bubble to travel from end to end.
5. Dry the ampoule and wait 5 minutes for color development. 6. Insert the Vacu-vial ampoule into the photometer, flat end first, and obtain a reading in ppm.

 


More CHEMetrics Kits for Sulfide:

Vacu-Vials
Product Number Method   Range Price
K9523 Methylene Blue   0-6.00ppm $30.00
Chemets Kits
Product Number Method MDS Range Price
K9510 Methylene Blue 0.05 ppm 0-1 & 1-10ppm $66.00
Vacuettes
Product Number Method MDS Range Price
K9510D Methylene Blue 5 ppm 0-30 & 30-300 ppm $71.00
K9510A Methylene Blue 10 ppm 0-60 & 60-600 ppm $71.00
K9510B Methylene Blue 20 ppm 0-120 & 120-1200 ppm $71.00
K9510C Methylene Blue 200 ppm 0-1200 & 1200-12,000 ppm $72.00

 

Downloads:

K-9503/K-9523 Instructions

Safety Data Sheet

Sulfide Tech Sheet

Sulfide Information

More Information
Manufacturer CHEMetrics
Call For Price No
Gas Sulfide
4-20 mA Output No
Voltage Output None
Power Requirements 4 AAA Batteries
Datalogging No
Warranty 1 Year
Method Methylene Blue
Range 0-3.00 ppm or 0-1.00 ppm depending on reader
Write Your Own Review
You're reviewing:K-9503 Sulfide
Your Rating
We found other products you might like!
Loading...