EZ-1X Ozone Detector
The EZ-1X is a low-cost handheld and fixed ozone detector that measures ozone from 0.02-0.14 ppm. Perfect for measuring ozone in the OSHA levels. The EZ-1X has a small size that fits in your hand and operates off a battery, or AC power.
Uses an easy to read Multicolor bar graph display (red at .1 ppm).
$367.00
7 In Stock
Related Products
Check items to add to the cart or
The EZ-1Z Handheld Ozone Detector is a great ozone monitor to measure ambient ozone levels up to 0.14 ppm. Using clear and easy to see LED bars to indicate ozone levels, the EZ-1X will measure ozone from 0 - 0.14 ppm in 0.02 ppm increments.
The EZ-1X is battery powered and can be used as a portable handheld device. Great to measure ambient ozone levels for safety applications where ozone levels up to 0.14 ppm need to be measured. The OSHA 8-hour TWA exposure limit is 0.1 ppm, therefore this is the perfect monitor to use for low-level ozone measurements near the OSHA safety levels.
The EZ-1X has a fast and continuous response. It is rugged and versatile. There are no excess controls to mess with of cause confusion.
Click here to learn more about ozone safety
Features:
-Constantly monitors your work environment. Ozone concentration shown by a multicolored graphical display from green (safe) to yellow (caution) to red (danger).
-No installation required. Easily understood by non-technical personnel.
-Fieldwork and walk around analysis possible via power from internal rechargeable batteries.
-Compatible with other Eco Sensors VOC and ozone sensing, monitoring, and control products.
-Lowest cost.
Specifications:
-Range: .02-.14 ppm of ozone
-Bargraph Display: Normally green. Yellow at .05 ppm (caution). Red at .1 ppm (danger).
-Response time: Within 10s of seconds of the ozone reaching the sensor.
-Measurement Principle: HMOS (heated metal oxide semiconductor) sensor.
-Size: 85 × 35 × 60 mm (3.25 × 1.375 × 2.375 in).
-Weight: 154 gr (6 oz).
-Power Requirements: 12-24 VDC at 300 mA. AC adapters available worldwide.
-Battery: Self-contained NiMH. Approximately 8 hour capacity. Recharged by AC adapter overnight.
-Calibration: Calibrate annualy and replace your EZ-1X when the sensor fails (Sensor Life: approx. 2 years)
Manual:
-EZ-1X Ozone Sensor User Manual
Links to Tech tips and Info:
EZ-1X Introduction Video:
| Manufacturer | Eco Sensors |
|---|---|
| Quickbooks Stock Level | 7.000000 |
| Call For Price | No |
| Gas | Ozone (O3) |
| Sampling Method | Fan |
| Field Replaceable Battery | Yes |
| Warranty | 1 Year |
| Audible Alarm | No |
| Calibration | Annually |
| Sensor Life | 2 Years |
| Range | 0-0.14 ppm |
| Unit Features | - Low Cost - Easy to Use - Simple Display |
| Sensor Range | 0-0.14 ppm |
Write Your Own Review
We found other products you might like!
Aeroqual Series 200 Monitor (S-200) with Sensor Head
Call For Price
OG-3 Ozone Source Bump Tester
$544.00
C-30ZX Ozone Monitor
$536.00
OS-6 Ozone Monitor
$995.00
