OEM-1 Ozone Controller

OEM-1 Ozone Controller is great for integrated solutions or use within your ozone generator. A simple and effective method to control ozone levels, or shut down equipment in the event of an ozone leak.  The sensor range is 0-0.1ppm.

The OEM-1 is powered by either 120 VAC OR 12 VDC.  The OEM-1 offers a 0-1 VDC output signal. 

For reference the OEM-2 is a 12/24 VDC powered device that offers a 4-20 mA output signal.

Ozone Information

$275.00
  • Buy 5 for $225.00 each and save 18%
  • Buy 10 for $195.00 each and save 29%

Quantity Pricing:

  • 1-4 = $275 each
  • 5-9 = $225 each
  • 10+ = $195 each

Call for quantity discounts

The model OEM-1 is a system to control ozone generators and alarms based on an adjustable ozone concentration set point. It is designed to work with plug-in sensor modules for 0-0.1 ppm. These are specified when ordering by putting the ppm range after the model number. For example, a .1 ppm OEM-1 board system would be OEM-1-.1 and the replacement sensor module for it would be SM-1-.1. These same sensor modules also work in our OEM-2 boards which have advanced features such as 4-20 mA output. The sensors modules can also be located at a distance from the OEM-1 boards by 2 or 8 meter cables. These are readily available DIN M/F 5 pin extension cables.

One component of the OEM-1 system is the base board which incorporates the power supply, final signal processing, set-point controls, and the output relay. The other component is the sensor mounted with its associated electronics in a cylindrical DIN plug. This is pre-calibrated in our lab so that the sensor module and main board module together work as a calibrated system. If the sensor module is damaged, it is simply replaced by another pre-calibrated module.

 

OEM-1 Ozone Sensor Replacement:

Sensor replacement on OEM-1 is simply plug-n-play.  Remove the old SM-1 and replace with new. 

 

Downloads:

OEM-1 User Manual

OEM-1 tech sheet - Measuring voltage output

 

 

Links:

EcoSensors Calibration information

General Calibration Information

Ozone Information

More Information
Manufacturer Eco Sensors
Call For Price No
Gas Ozone (O3)
Range 0-0.1 ppm
Resolution 0.01 ppm
Response Time 8 seconds
Sensor type Heated Metal Oxide (HMOS)
Sampling Method Diffusion
Alarms NO/NC relay for control purposes
Operational Temperature Range 35 - 100 deg F
Operational RH Range 0 - 85% RH
Power Requirements 120 VAC
Field Replaceable Battery No
Warranty 1 Year
Write Your Own Review
You're reviewing:OEM-1 Ozone Controller
Your Rating
We found other products you might like!
Loading...