Chlorine Dioxide SafeAir Badge (382003-50)

SafeAir chemical detection badges are a visual indication badge that alerts you with a color changing exclamation mark when there is a specific chemical hazard.

Quantity = 50 badges  *clips are NOT included*

Note: we are not able to ship these badges overseas

Chlorine Information

$204.00

Color change for Chlorine & Chlorine Dioxide is from off-white to gray.

The SafeAir chlorine & chlorine dioxide badge may be used for personal or area monitoring for exposure times ranging from 15 minutes to 10 hours.

Introduction

Chlorine dioxide is a yellow to reddish-yellow gas with an unpleasant odor similar to chlorine and suggestive of nitric acid. Exposure may be highly irritating to the skin and mucous membranes of the respiratory tract and may cause pulmonary edema (abnormal fluid build up in the lungs). OSHA and NIOSH exposure limit for chlorine dioxide is 0.1 ppm (TWA).

Chlorine dioxide is used in the purification of water, the tanning and detanning of leather and the bleaching of cellulose, flour, leather, fats, and textiles, as well as in the paper and pulp industry

Principle of Operation

The SafeAir chlorine & chlorine dioxide badge is a monitoring system designed to indicate the presence of chlorine and/or chlorine dioxide at concentrations below the permissible exposure limit. The SafeAir chlorine & chlorine dioxide badge detects the presence of chlorine and/or chlorine dioxide by forming a color change in the shape of an exclamation mark inside the triangle. This indication is produced by a color-forming reaction, which occurs when the contaminant(s) react with a flat indicator layer. The SafeAir chlorine & chlorine dioxide badge is a dual-purpose badge. The color change may appear on the front and/or the back side of the badge depending upon the level of exposure of the two contaminants.

 SafeAir chemical detection badges are a visual indication badge that alerts you with a color changing exclamation mark when there is a specific chemical hazard.

Operating Instructions

1. Remove the pouch from the refrigerator and allow it to warm to room temperature.

2. Remove the badge from its protective pouch.

3. Remove activation label before monitoring.

4. For personnel monitoring, attach the badge near the user’s breathing zone (i.e. the collar) with the front side exposed to the surrounding atmosphere.

5. For area monitoring, attach the badge to a stand and mount in a centralized area with the front side exposed to the surrounding atmosphere.

6. The exclamation mark appears within the triangle when chlorine and/or chlorine dioxide are present. Please note that the exclamation mark will appear underneath the printed exposure dose (sensitivity).

7. To obtain the average concentration, divide the exposure dose (ppm-hr) by the exposure time in hours (hr).

Storage

The ChromAir chlorine & chlorine dioxide monitor should be refrigerated in its sealed bag at all times.

Sampling Parameters

  Chlorine Chlorine Dioxide

Color Change

yellow to orange

off-white to gray

Exposure level

0.18 ppm-hr

0.2 ppm-hr

Minimum detectable limit (8 hours)

0.025 ppm

Maximum recommended sampling time

10 hours

Minimum recommended sampling time

15 minutes

Relative humidity range

25% - 90%

Face velocity range

10 - 150 cm/sec

Temperature range

50ºF - 104ºF

Light effect - UV (direct sunlight)

no effect for 16 hr

no effect for 10 hrs

Light effect - visible

no effect

Color stability

4 weeks

Refrigerated shelf life

1 year

 

Downloads

382003 Manual

Chlorine Information

 

More Information
Manufacturer Morphix
Call For Price No
Gas Chlorine (Cl2), Chlorine Dioxide (ClO2)
Operational Temperature Range 50°F - 104°F
Operational RH Range 25% - 90%
Maximum Exposure .2 ppm-hr
Write Your Own Review
You're reviewing:Chlorine Dioxide SafeAir Badge (382003-50)
Your Rating
Loading...