Chlorine SafeAir Badge (382009-50)

SafeAir chemical detection badges are a visual indication badge that alerts you with a color changing exclamation mark when there is a specific chemical hazard.

Quantity = 50 badges  *clips are NOT included*

Chlorine Information

$165.50

Color change for Chlorine is from yellow to orange.

The SafeAir Chlorine badge may be used for personnel or area monitoring for exposure times ranging from 15 minute to 48 hours. For higher resolution, the SafeAir chlorine badge may be used in conjunction with the SafeAir chlorine color comparator (part number: 383010).

Introduction

Chlorine is a greenish-yellow gas with a pungent, irritating odor. Generally, chlorine is a potent respiratory system irritant. Mild exposures to chlorine cause burning of eyes, nose and mouth. Exposure to concentrations as high as 1000 ppm is likely to be fatal after a few deep breaths. The OSHA PEL for chlorine is 1 ppm (ceiling), whereas the NIOSH REL is 0.5ppm (ceiling).

Chlorine is an important chemical commodity widely used in the production of safe drinking water. It is also extensively used in the production of paper products, dyestuffs, textiles, petroleum products, chlorinated solvents, etc.

Principle of Operation

The SafeAir chlorine badge is a monitoring system designed to indicate the presence of chlorine at concentrations below the permissible exposure limit. The SafeAir chlorine badge detects the presence of chlorine by forming a color change in the shape of an exclamation mark inside the triangle. This indication is produced by a color-forming reaction which occurs when chlorine reacts with a flat indicator layer.

 SafeAir chemical detection badges are a visual indication badge that alerts you with a color changing exclamation mark when there is a specific chemical hazard.

Operating Instructions

1. Remove the pouch from the refrigerator and allow it to warm to room temperature.

2. Remove the badge from its protective pouch.

3. For personnel monitoring, attach the badge near the user’s breathing zone (i.e. the collar) with the front side exposed to the surrounding atmosphere.

4. For area monitoring, attach the badge to a stand and mount in a centralized area with the front side exposed to the surrounding atmosphere.

5. The exclamation mark appears within the triangle when chlorine is present. Please note that the exclamation mark will appear underneath the printed exposure dose (sensitivity).

6. To obtain the average concentration, divide the exposure dose (ppm∙hr) by the exposure time in hours (hr).

Storage

The ChromAir chlorine monitor should be refrigerated in its sealed bag at all times.

Sampling Parameters

Color Change

yellow to orange

Exposure dose (Badge)

0.18 ppm-hr

Exposure dose (Badge with color comparator)

0.03 - 3.0 ppm-hr

Minimum detectable limit (8 hours)

0.023 ppm

Maximum recommended sampling time

48 hours

Minimum recommended sampling time

15 minutes

Relative humidity range

30% - 90%

Face velocity range

10 - 150 cm/sec

Temperature range

60ºF - 91ºF

Light effect - UV (direct sunlight)

no effect

Light effect - visible

no effect

Color stability

4 weeks

Refrigerated shelf life

2 year

 

Downloads

382009 Manual

Chlorine Information

More Information
Manufacturer Morphix
Call For Price No
Gas Chlorine (Cl2)
Operational Temperature Range 60°F - 91°F
Operational RH Range 30% - 90%
Maximum Exposure 0.18 ppm-hr
Write Your Own Review
You're reviewing:Chlorine SafeAir Badge (382009-50)
Your Rating
Loading...