Are you in charge of keeping the air clean and safe? Then you know how important it is to make sure devices that detect ozone levels are spot-on. With the Ozone GENie System, getting things calibrated is super simple. Let’s go through it step by step, so you can make sure your detectors are working perfectly.
What’s in the Box
The Ozone GENie System makes calibration easy peasy. It comes with all the important stuff: the ozone module, the gas system for calibration, tubing, and the power cord. No need to worry about missing parts – it’s all there!
Getting Started
Hooking up the ozone module to the GENie system is a piece of cake. Just connect the backs of the units together securely. Then, hold down the power button until the screen lights up. The GENie will take about 2 minutes to warm up, getting ready to go.
Getting the GENie Ready
Now that the unit is warmed up, it’s ready to start working. The GENie we’re using has a fixed flow rate of 1.0 ppm (that’s parts per million). If you need to change the flow rate or ozone range, no worries – some GENie units can do that too!
Calibrating Your Devices
To calibrate your devices, attach the GENie tubing to the top and connect it to your gas detector. Check your detector’s manual for how to calibrate it exactly, following the instructions to a T. Do it right, and your unit will be all set to give accurate ozone readings.
Wrapping Up
The Ozone GENie System makes calibration a breeze, making sure your ozone detection is on point. Follow these simple steps, and you’ll be a calibration pro in no time. Whether you’re in a factory, doing environmental checks, or anywhere else that needs accurate ozone readings, the Ozone GENie System has got you covered.
With its easy-to-use design and all-in-one functionality, the GENie makes calibration a cinch, giving you reliable results every single time. Get your hands on the Ozone GENie System today and make sure your calibration game is top-notch!
You can purchase the GENie here: https://www.gas-sensing.com/genieo3.html#2119=
