phone Contact Us

What Gas Do You Want To Monitor?

Acid Gases Acetic Acid Acetone Acetylene Adenosine Triphosphate (ATP) Alcohol Alkalinity Ammonia Aromatic Isocyanates (TDI & MDI) Arsine Bacteria/APC Benzene Bromine Butane Carbohydrazide Carbon Dioxide Carbon Monoxide Chloride Chlorine Chlorine Dioxide Chromate COD Combustibles Copper Cyanide DEHA Detergents Diborane Dimethylamine E. Coli Ethane Ethanol Ethylene Ethylene Oxide Fluoride Fluorine Formaldehyde Freon Germane Glutaraldehyde Glycol Hardness Helium Hexane Hydrazine Hydride HydroCarbons Hydrogen Hydrogen Bromide Hydrogen Chloride Hydrogen Cyanide Hydrogen Fluoride Hydrogen Peroxide Hydrogen Selenide Hydrogen Sulfide Hypochlorite Iodine Iron Isobutane Isobutylene Manganese Mercaptobenzothiazole Mercury Methane Molybdate Monochloramine Nitrate Nitric Oxide Nitrite Nitrogen Nitrogen Dioxide Nitrogen Oxides NMHC Oxygen Ozone Particulate Matter Pentane Peracetic Acid Perchloroethylene pH Phenols Phosgene Phosphate Phosphine Silane Silica Sodium Persulfate Sulfate Sulfide Sulfite Sulfur Dioxide Sulfur Hexafluoride Thiosulfate Total Dissolved Solids (TDS) VOC Zinc

Shop By Brand

Aeroqual Eco Sensors KWJ Engineering ATI Thermo Scientific Morphix Technologies Honeywell InterMountain RKI Bosean ACD Teledyne 2B Technologies
S-500 a portable and versatile monitor

Hydride

Hydride Products we offer:

Both fixed mount and portable sensors, along with replacement sensor heads and dissolved hydride kits from all the manufacturers we represent can be found using the links below. For questions on what product might be right for you, Contact us today!

 

Replacement Sensors

Hydride gases are considered to be:

SiH2  Silylene
AsH2   Arsanyl
B2H6  Diborane
GeH4  Germane
PH3  Phosphine
H2Se Hydrogen Selenide

 

Calibration Services:

 

All sensors require a yearly calibration to ensure your gas measurements are accurate and performing within manufacturer standards. This page is desiccated to the individual manufacturers we represent and their specific calibration procedures. 

**Calibration Service Request Form **

Calibration Costs:

Calibration costs do vary, see below to get an estimate: 

Calibration Fee: $150

Analyzer Calibration Fee: $300

PM Calibration Sensor Fee: $330

Genie Calibration Fee: $265

ATI Calibration Fee: $205

** note that prices are subject to change per labor and parts required.
 

 

12 Items

Disabled