ATI Technical Documents
F12 Enclosure dimensions and technical drawings
D12 Enclosure dimensions and technical drawings
EcoSensors Technical Documents
Ozone Use for air quality in Casino - Case Study
UL Ozone Safety Standards
Ozone monitoring and control for air treatment systems
Ozone Safety Standards
Ozone measurement in fire restoration applications
Ozone sensor suggestions for cold storage applications
...
Analytical Technologies Incorporated (ATI)
This information applies to the sensor module used in the C16 , F12 , and D12 Monitors.
ATI Smart Sensors come pre-calibrated and have all calibration information loaded on the sensor. The sensor can be swapped between monitors without any special requirements for proper calibration.
Sensors are fairly low cost and are replaced annually to remain in calibration. Periodic bump tests can be performed to ensure the sensor is still ope...
General Calibration Information
All Gas Sensors will require periodic calibration to ensure your gas measurements are accurate and correct. Different gasses, and sensor manufactrers will have differeing requirements and methods for calibration. This page will serve to provide general calibration information and links to specific calibration procedures from the sensor manufacturers we represent.
Should you have any questions about sensor calibration, or would like us to help you with your ...
Aeroqual Portable Monitors Calibrations FAQ
This technical information on this page is relevant for the Handheld Series-200, 300, 500, and Fixed Mount Series-900, 930, 940. For information on the SM-70 and SM-50 scroll to the bottom of this page.
1. What do I calibrate - the monitor or the sensor head?
Aeroqual’s unique system of interchangeable sensor heads means they can be calibrated independently of the monitor. If you are sending a sensor head to us for f...
EcoSensors devices have a variety of different sensors and calibration options and prodedures. These will vary by product and sensor used in that product. See the list below for your specific sensor and relevant calibration information. First, follow our short list of FAQ's to familirize yourself with general calibration inforamtion.
EcoSensors FAQ and General Information
Will I get a Calibration Certificate?
Yes, all EcoSensors products are shipped with a recent calibratio...
Carbon Monoxide:
Other Names
Carbonic oxide
Chemical Formula
CO
CAS Number
630-08-0
Industry Uses
Machinery, Automotives, Furnaces, Breweries
Health Risks
Carbon Monoxide Poisoning; headaches, dizziness, loss of consciousness, death; Neurological, reproductive, and/or respiratory damage
Vapor Pressure
>35 atm...
Hydrogen Sulfide:
Other Names
Hydrosulfuric Acid; Sulfane; Dihydrogen Monosulfide
Chemical Formula
H 2 S
CAS Number
7783 – 06 – 4
Industry Uses
Chemical Laboratories; Metallurgy
Health Risks
Irritation of eyes and mucous membranes; Convulsions; Headaches, Dizziness
Vapor Pressure
...
