Aeroqual portable monitors are designed for continuous use and require minimal maintenance and calibration.
Maintenance
1 Year
Calibration
In order to maintain measurement accuracy, we recommend that sensor heads are re-calibrated on a yearly basis or more often if measurement certainty is critical for the application.
We recommend calibration is performed by the factory, and can be sent back to Gas Sensing using this RMA form. Calibration can performed in the field with a Series 500 and suitable equipment – learn more about Calibration options.
2 Years
Replacement
Every sensor has a finite life due to environmental exposure, chemical life and oxidation. To ensure continuous uninterrupted operation we recommend you plan for replacement of sensors at 2 years.
Contact Gas Sensing or find replacement sensors on our website.
Calibration
Factory Calibration
Most of our sensors can have calibration performed in the filed with a Series 500 and suitable equipment. Where this is not available, or for added assurance, we offer factory calibration. Learn more about gas sensor calibration.
Field Calibration
We offer a calibration accessory for filed calibration. The calibration accessory is a simple and effective tool for calibrating sensor heads. By delivering a consistent flow of calibration gas to the sensor head, without forcing air at the sensor, it ensures the most accurate calibration possible. It can also be used to humidify the gas which is important for the best results with GSS sensors.
More information on the Aeroqual Gas Detection Monitors can be found on Gas Sensings website, using the links below.