Ozone is a powerful oxidant that is widely used in various applications, including water disinfection, odor removal, and industrial sterilization. However, excessive ozone levels can pose health risks, making it crucial to monitor ozone concentrations in various settings. The K-7423 Ozone Testing Vacu-vials offer a convenient and reliable method for measuring ozone levels in water.
Why Choose Vacu-vials for Ozone Testing?
CHEMetrics Vacu-vials provide a simplified and reliable approach to measuring dissolved substances in liquids. Unlike traditional visual test kits, Vacu-vials allow for instrumental analysis using CHEMetrics Direct-Redout Photometers or compatible spectrophotometers. This method eliminates the potential for operator error and provides accurate and reproducible results.
Key Features of the K-7423 Ozone Testing Vacu-vials:
- Wide Measurement Range: The K-7423 Ozone Testing Vacu-vials can accurately measure ozone levels in water from 0 to 5.00 ppm.
- Ease of Use: The test procedure is simple and straightforward, requiring only a few steps.
- Safety and Reliability: The sealed Vacu-vial ampoules ensure the stability of reagents and minimize the risk of exposure to chemicals.
- Versatility: The Vacu-vials can be used with CHEMetrics Direct-Redout Photometers or any spectrophotometer compatible with 13mm diameter round cells.
Applications of the K-7423 Ozone Testing Vacu-vials:
- Monitoring ozone levels in drinking water: Ensuring compliance with ozone disinfection regulations.
- Testing ozone concentrations in industrial processes: Maintaining optimal ozone levels for effective sterilization and odor removal.
- Assessing ozone concentrations in wastewater treatment: Evaluating ozone’s effectiveness in wastewater disinfection.
Instructions for Using the K-7423 Ozone Testing Vacu-vials:
- Prepare the sample: Add 5 drops of Activator Solution to an empty sample cup.
- Fill the sample cup: Fill the sample cup to the 25 mL mark with the sample to be tested, minimizing turbulence.
- Activate the Vacu-vial: Immediately place the Vacu-vial ampoule tip-first into the sample cup. Snap the tip, and the ampoule will automatically fill.
- Mix the ampoule: Gently tilt the ampoule from side to side to allow the bubble to travel from end to end, ensuring thorough mixing.
- Color development: Dry the ampoule and wait 2 minutes for the color to develop.
- Obtain the measurement: Insert the Vacu-vial ampoule into the photometer, flat end first, and obtain a reading in ppm.
Conclusion
The K-7423 Ozone Testing Vacu-vials provide a convenient, reliable, and accurate method for measuring ozone levels in water. Their simplicity, safety features, and versatility make them ideal for various applications in water treatment, industrial processes, and environmental monitoring. By regularly monitoring ozone levels, users can ensure compliance with regulations, maintain optimal ozone concentrations for effective disinfection, and protect against potential health hazards.
These Testing Vacu-vials can be found here: https://www.gas-sensing.com/dissolved-meters/k-7423.html
