We provide Gas Sensors for every workplace, or safety need.
Gas sensors for leak detection
Work place safety alarm
Personal safety sensor
Hazardous location sensor
UV Analyzers
OEM Solutions
Contact us to help you choose the right Sensor for your application:
605-368-1404
sales@gas-sensing.com
Portable Gas Sensors
Fixed Mount Gas Sensors
Re...
About Gas-Sensing.com
Our purpose is to provide quality gas monitoring products to satisfy all of your safety and control needs!
Who we are...
Gas-Sensing.com was originally founded by Mark Bosma and Joel Leusink, to fill the needs of customers that went beyond just ozone monitoring. This quickly turned into a larger vision, expanding to online sales and a wider audience.
What we sell...
Please feel free to browse our website, compare products, and con...
Our purpose is to provide quality gas monitoring products to satisfy all of your safety and control needs!
Manufacturers we Represent
Who we are...
Gas-Sensing.com was originally founded by Mark Bosma and Joel Leusink, to fill the needs of customers that went beyond just ozone monitoring. This quickly turned into a larger vision, expanding to online sales and a wider audience.
What we sell...
Please feel free to browse our website, compare ...
Gas-Sensing can be contacted via the following information:
Phone: 605-368-1404 E-mail: support@gas-sensing.com Mailing Address:
Gas-Sensing 214 US Highway 18 PO Box 29 Inwood, IA 51240
Please fill in the e-mail form below:
Write Us
Jot us a note and we’ll get back to you as quickly as possible.
Name
...
General Calibration Information
All Gas Sensors will require periodic calibration to ensure your gas measurements are accurate and correct. Different gasses, and sensor manufactrers will have differeing requirements and methods for calibration. This page will serve to provide general calibration information and links to specific calibration procedures from the sensor manufacturers we represent.
Should you have any questions about sensor calibration, or would like us to help you with your ...
The Portasens is known as a great ambient air portable gas leak detector that features: - electrochemical smart-cell sensor (which can be calibrated independently of the unit) - available to measure over 30 types of gases - a rugged internal sample pump - excellent accuracy and repeatability - easy to read back-lit LED display - flexible wand for pinpointing leak points - datalogging capabilities - integrated audible alarms
Because of the many attractive features a...
EcoSensors devices have a variety of different sensors and calibration options and prodedures. These will vary by product and sensor used in that product. See the list below for your specific sensor and relevant calibration information. First, follow our short list of FAQ's to familirize yourself with general calibration inforamtion.
EcoSensors FAQ and General Information
Will I get a Calibration Certificate?
Yes, all EcoSensors products are shipped with a recent calibratio...
Analytical Technologies Incorporated (ATI)
This information applies to the sensor module used in the C16 , F12 , and D12 Monitors.
ATI Smart Sensors come pre-calibrated and have all calibration information loaded on the sensor. The sensor can be swapped between monitors without any special requirements for proper calibration.
Sensors are fairly low cost and are replaced annually to remain in calibration. Periodic bump tests can be performed to ensure the sensor is still ope...
Gas-Sensing is a partner company to Oxidation Technologies, LLC. Oxidation Technologies provides services and products exclusively to the ozone industry. For all ozone related inquiries please refer to Oxidation Technologies.
What is Ozone?
The oxygen atom is unstable in the atomic form. Oxygen is stable in the diatomic form as O2. The air we breath today is made up of about 21% oxygen, this makes oxygen one of the most common molecules found in nature today.
Ozone is a triato...
This information is specific to the A-21ZX as it is the most popular ozone sensor EcoSensors sells. While the general information found in this article are specific to the A-21ZX, the technical aspects are the same for the EZ-1X, C-30ZX, and OS-1X sensors. Should you have any questions about the details of your sensor please contact Gas Sensing .
Replacement sensors are available from Gas Sensing for $75. The same sensor is used in the A-21ZX, C-30ZX, EZ-1X, and OS-1X Devices.
...
This document refers to the C-21 and earlier EcoSensors VOC Instruments
Replacement sensors for the C-21 are available from Gas Sensing for $50. Please contact us for ordering information.
The Eco Sensors C-21 responds to most reducing VOCs, but not with the same degree of response for each VOC. The response is essentially logarithmic. For the first half of the scale (to about the 2nd yellow bar), the response is approximately linear. After that, it gets sharply logarithmic (much more c...
404 / Page Not Found
Whoops, our bad...
The page you requested was not found, and there are a few possible reasons, including:
If you typed the URL directly, please double check to ensure it was typed correctly.
If you clicked on a link to get here, the link may be outdated.
In any case, we'll do what we can to get you back on track. Try any of the following:
Go back to the previous page.
Use the search bar at the top of the p...
Please replace this text with you Privacy Policy. Please add any additional cookies your website uses below (e.g., Google Analytics)
This privacy policy sets out how Gas-Sensing.com uses and protects any information that you give Gas-Sensing.com when you use this website. Gas-Sensing.com is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in acco...
