ATI A14/A11 Ethylene Oxide Explosion Proof Sensor

PN - 00-1053, C10-37 Ethylene Oxide sensor.  Replacement explosion-proof sensor for ATI A14/A11 Gas Detector.

Replaces Ethylene Oxide sensor, standard calibration range is 0-20 ppm Ethylene Oxide detection.

Ethylene Oxide Information

SKU
ATI 00-1053e
  $325.00

Description / ATI A14/A11 Ethylene Oxide Explosion Proof Sensor

Replacement explosion-proof sensor for ATI A14/A11 Gas Detector.

Replaces Ethylene Oxide sensor, 0- 20 ppm range

Sensor can be installed in existing transmitter and is a simply plug in connection.  Sensor must be calibrated on transmitter for proper operation.  For information on calibration follow this link, or contact our office.

Ethylene Oxide Information

 

 

All sensors require a yearly calibration to ensure your gas measurements are accurate and performing within manufacturer standards. This page is desiccated to the individual manufacturers we represent and their specific calibration procedures. 

**Calibration Service Request Form **

Calibration Costs:

Calibration costs do vary, see below to get an estimate: 

Calibration Fee: $150

Analyzer Calibration Fee: $300

PM Calibration Sensor Fee: $330

Genie Calibration Fee: $265

ATI Calibration Fee: $205

** note that prices are subject to change per labor and parts required.

More Information

Manufacturer ATI
Gas Ethylene Oxide (ETO)
Sensor Type Electrochemical Cell
Range 0- 20 ppm
Accuracy Generally ±5% of value, but limited by available calibration gas accuracy.
Standard Range 0-20 ppm
Minimum Range 0-10 ppm
Maximum Range 0-20 ppm
Monitor sensor fits A14/A11
Sensitivity 0.1 ppm
Operational Temperature Range -25° to +55°C
Operational RH Range 0-95% non-condensing
Warranty 1 Year

We found other products you might like!

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.