I-2022 Ozone

Dissolved Ozone SAM Kit

Measure ozone 0-0.75 ppm and has a digital LED readout

Ozone Information


The I-2022 Dissolved Ozone Meter is designed for accurately and quickly measuring ozone in water levels from 0 - 0.75 ppm.  This device uses the Indigo Method for testing.  This method is based on the colorization of dye by ozone, where the loss of color is directly proportional to the ozone concentration.  The results are then displayed on the monitor in ppm (mg/L) of ozone present.

This device has LED display for precise and accurate readout and is easy to use.  Once the I-2022 has been purchased the cost per test is only $1.02.

What's included:

  • SAM Photometer (I-2022)
  • K-7433 Ozone Vacu-vials (30 test)
  • A blank/zero ampoule
  • 25 mL sample cup
  • 4 AAA batteries for operation
  • Screwdriver for installing/replacing batteries
  • Instruction manual
  • Carrying case to hold device & accessories


How to use the I-2022:

  1. The I-2022 must be turned on.
  2. Put the Zero ampoule into the device and cover with the light shield piece to zero out the unit. (NOTE: This must be zeroed any time the unit is turned off and turned back on)
  3. To test, fill the 25 mL sample cup with your ozonated water.Fill the sample cup to 25ml
  4. Snap the end of the Vacu-vial in the water on the bottom/side of the 25 mL sample cup.Snap the tip of the ampoule on the bottom and side of the sample cup
  5. Mix the contents of the ampoule by tipping back and forth a few times.Tip the vacu-vial back and forth to mix
  6. Dry the vacu-vial and place into the device (flat end first) for readout.Dry vacu-vial and then insert into the I-2019


I-2022 Instructions

K-7433 Instructions

Ozone Information

More Information
Manufacturer CHEMetrics
Call For Price No
Gas Ozone (O3)
4-20 mA Output No
Voltage Output None
Power Requirements 4 AAA Batteries
Datalogging No
Warranty 1 Year
Write Your Own Review
You're reviewing:I-2022 Ozone
Your Rating
We found other products you might like!