RAP-2 Alarm Panel
The RAP-2 Remote Alarm Panel is for alarming when signals from gas monitors reach preset limits or set-points. The alarms are a red strobe light and a loud audible alarm.
The RAP-2 also outputs its input signal in 4-20 mA form for building automation systems and other applications requiring long signal paths. The RAP-2 is powered by 14-30 VAC or DC. This remote alarm panel was designed for use with the Eco Sensors C-21, C-30ZX, EE-2, and OS-4. However, it can be used with most any gas monitor.
The RAP-2 is extremely versatile offering many features that can be useful for a gas monitor control system.
The RAP-2 can be used for the following:
- Remote visual alarm (user settable alarm point)
- Remote audible alarm (user settable alarm point)
- Convert voltage input 0-2 VDC to 4-20 mA output
- Provide fail safe dry relay contacts for external alarm (user settable alarm point)
- Power monitor 14 - 30 VDC from the RAP-2
- Can operate from 14-30 VDC or 14-30 VAC
Connections of the RAP-2 Shown below:
Internal view of the RAP-2 Shown below:
- Swimming pools.
- Laundries using ozone.
- Large noisy factory environments.
- Casinos and other ozonated public areas.
- Agricultural storage areas.
- Food processing plants.
- Rugged polycarbonate enclosure with hinged door.
- Accepts input of 0-2 VDC, 4-20 mA and relay closure.
- Loud pulsating audio alarm with silencing button.
- Very bright red strobe light.
- 4-20 mA signal and relay outputs.
- Alarm set-point adjustment.
- Uses easily available 14-30 VAC or DC power.
- Signals from instruments can be transmitted by inexpensive twisted pair.
- 125 × 175 × 77 mm (5 × 7 × 3 in).
|Call For Price||No|
|Monitor Type||C-21, C-30ZX, F12, OS-4, OS-6, SM-70|