BW Solo replacement H2 Sensor

The Replacement H2 sensor is used to measure hyrdogen levels from 0-1000ppm.

To be used in the BW Solo H2.

$570.57

Features:

The BW Solo 1-Series sensors offer a fast response time, reliable performance, and long life even in extreme environments. Due to their small size, gas diffuses into them quickly, allowing them to respond to fluctuations in gas levels as quickly as they occur. The 1-Series sensors are built to last up to two years and come with a 1-year warranty. Sensors can be replaced with minimal effort and without exposing the internal components of your BW Solo.

 

Sensor Replacement Instructions:

  1. Power down your detector

  2. Use the calibration cap to remove the front of the BW solo

  3. Carefully Peel off the sensor filter

  4. Use a Philip’s head screwdriver to remove the four screws securing the sensor cover

  5. Gently remove the old sensor and sensor cover

  6. Push the top of the sensor with your thumb until it pops down out of the sensor cover

  7. Remove the o-ring from the sensor cover

  8. Line up the winged corner of the replacement sensor with the winged corner of the cover

  9. Press the sensor cover over the sensor only halfway

  10. Flip the unit over and fit the o-ring over the sensor making sure all four corners are secured

  11. Place the sensor and cover back into the solo lining up with the groove on the alarm side

  12. Replace the screws

  13. Replace the sensor filter

  14. Snap the cover back into place

 

Full List of Honeywell BW Solo Replacement Sensors:

Gas Type Product name Measuring Range Price (non-wireless) Price(wireless)
Ammonia (NH3) PCB NH3 0-100ppm $399 $434
Ammonia (NH3) extended range PCB NH3 extended 0-1000 ppm $417 $452
Carbon monoxide (CO) PCB CO 0-2000 $270 $305
Carbon monoxide (CO) H2 resistant PCB CO H2 resistant 0-2000ppm $329 $364
Chlorine (Cl2) PCB Cl2 0-50 ppm $329 $364
Chlorine dioxide (ClO2) PCB ClO2 0-1ppm $329 $364
Ethylene Oxide (ETO)(C2H4) PCB ETO 0-100 ppm $452 $487
Hydrogen (H2) PCB H2 0-1000 ppm $455 $490
Hydrogen cyanide (HCN) PCB HCN 0-100 ppm $329 $364
Hydrogen sulfide (H2S) PCB H2S 0-200 ppm $270 $305
Hydrogen sulfide (H2S) extended range PCB H2S extended 0-500 ppm $259 $294
Nitric oxide (NO) PCB NO 0-250 ppm $329 $364
Nitric dioxide (NO2) PCB NO2 0-100 ppm $329 $364
Oxygen (O2) PCB O2 0-30%v/v $270 $305
Oxone (O3) PCB O3 0-1 ppm $557 $592
Phosphine (PH3) PCB PH3 0-5 ppm $329 $364
Sulfur dioxide (SO2) PCB SO2 0-100ppm $329 $364
More Information
Manufacturer Honeywell / BWT
Call For Price No
Gas Hydrogen (H2)
Sensor Type GSS (Gas Sensitive Semiconductor)
Range 0-1000 ppm
Sampling Method Fan
Operational Temperature Range -60 to 40C / -40 to 140F
Warranty 1 Year
Write Your Own Review
You're reviewing:BW Solo replacement H2 Sensor
Your Rating
Loading...