R-7904A Peracetic Acid

K-7904A Peracetic Acid Kit was designed to obtain Peracetic Acid levels from 0-70 ppm and 0-300 ppm

Peracetic Acid Information

$31.00

The K-7904A Peracetic Acid Kit was designed to accurately measure the levels of Peracetic Acid in water from 0-70 ppm and 0-300 ppm. K-7904A uses the DPD Method, in which the sample is treated with an excess of potassium iodide. Peracetic acid oxidizes the iodide to iodine. The iodine then oxidizes DPD (N, N-diethyl-p-phenylenediamine) to form a pink-colored species that is directly proportional to the peracetic acid concentration in the sample. Results are expressed as ppm (mg/L) peracetic acid

Various oxidizing agents such as halogens, ozone, and cupric ions will produce high test results. Hydrogen peroxide does not interfere if present at levels comparable to the peracetic acid levels.

R-7904A Refill Package includes 30 tests and can be purchased separately.

What's included:

  • 30 Ampoules
  • Dilutor Snapper Cup
  • Micro-Test Tube
  • Low Range Comparator
  • High Range Comparator
  • Instruction Manual

  

 

How to use:

  1. Add 5 Drops of Activator Solution to empty dilutor snapper cup.
  2. Fill to the dilutor snapper cup to the specified mark with distilled water.Fill the sample cup to 25ml  


  3. Fill the Micro-Test Tube half way with water sample.
  4. Ensure the VACUette tip is firmly attached to ampoule tip. Holding the VACUette horizontally, touch the tip to the contents of the micro-test tube.
  5. Place the VACUette between the vertical tip guides on the inside of the dilutor snapper cup. Snap the ampoule tip.
  6. Mix ampoule by inverting several timesTip the vacu-vial back and forth to mix
  7. Dry the ampoule. Wait 1 minute for color development.
    Dry vacu-vial and then insert into the I-2019
  8. Results should be obtained using the appropriate comparator. 

Downloads:

K-7904A Instructions

Peracetic Acid Tech Sheet

Peracetic Acid Information

 

More Information
Manufacturer CHEMetrics
Call For Price No
Gas Peracetic Acid
4-20 mA Output No
Voltage Output None
Power Requirements 4 AAA Batteries
Datalogging No
Warranty 1 Year
Write Your Own Review
You're reviewing:R-7904A Peracetic Acid
Your Rating
We found other products you might like!
Loading...