K-5543 Hydrogen Peroxide
K-5543 Peroxide Vacu-vials Kit was designed to obtain Peroxide levels from 0-6.0 ppm
This kit requires the use of a CHEMetrics Direct-Readout Photometer, the I-2016 SAM Photometer, or a spectrophotometer capable of accepting a 13 mm diameter round cell. Instrument sold separately.
Why Choose Vacu-vials?
CHEMetrics Vacu-vials self-filling ampoules are a great way to test for dissolved substances in liquid. Unlike our visual test kits, the Vacu-vials test kit allows you to obtain an instrumental result using the CHEMetrics Direct-Redout Photometers or any spectrophotometer capable of accepting a 13m diameter round cell. When using equipment from another manufacturer, set the spectrophotometer to absorbance mode, select the wavelength specified by the Vacu-vials kit instructions, and follow the test procedure. The K-5543 Hydrogen Peroxide Kit was designed to accurately measure the levels of Hydrogen Peroxide in water from 0-6.0 ppm.
Safe and Reliable Results:
While traditional methods often require multiple steps and thorough preparation, these test kits allow you to obtain dependable results with a few simple steps. By simplifying the testing method, Vacuvials test kits reduce the potential for operator error. Additionally, each of the ampoules contained in the test kits is vacuum sealed which helps eliminate the problem of obtaining inaccurate results from stale or unstable reagents. These reagents are stored right in the tip of each ampoule and sealed in glass, thereby minimizing direct contact with the chemicals.
-30 self-filling Ampoules
-25 mL Sample Cup
K-5543 uses the Ferric Thiocyanate Method, which method consists of ammonium thiocyanate and ferrous iron in acid solution. Hydrogen peroxide oxidizes ferrous iron to the ferric state, resulting in the formation of a red thiocyanate complex. Chlorine will not interfere with this method. Ferric iron and peracetic acid will interfere. Results are expressed as ppm (mg/L) H2O2.
How to Use:
|1. Fill the sample cup to the 25 mL mark with the sample to be tested.||2. Place the Vacu-vial ampoule tip-first into the sample cup. Snap the tip and the ampoule will automatically fill.|
|3.To mix the ampoule, tilt it from side to side, allowing the bubble to travel from end to end.||4. Dry the ampoule|
|5. Wait 2 minutes for color development.||6. Insert the Vacu-vial ampoule into the photometer, flat end first, and obtain a reading in ppm.|
WARNING! This product can expose you to chemicals including methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
More CHEMetrics Kits for Hydrogen Peroxide:
|K5513||Ferric Thiocyanate||0-6.00 ppm||$35.00|
|I2016||Ferric Thiocyanate||0-6.00 ppm||$415.00|
|K5502||Direct Nesslerization||0.05ppm||0-0.5 ppm||$52.00|
|K5510||Hydroxybenzyl Alcohol (HBA)||0.125ppm||0-0.8 & 1-10 ppm||$66.00|
|K5510D||Direct Nesslerization||10ppm||0-25 & 30-300 ppm||$71.00|
|K5510A||Direct Nesslerization||20ppm||0-50 & 60-600 ppm||$71.00|
|K5510B||Direct Nesslerization||100ppm||0-100 & 120-1200 ppm||$72.00|
|K5510C||Direct Nesslerization||5ppm||0-1000 & 1200-12,000 ppm||$71.00|
|K-5530||Ceric Sulfate Titrant with Ferroin Indicator||0.10%||0.1%-1.0% (up to 20% with dilution)||$33.00|
Downloads and Links:
|Call For Price||No|
|Gas||Hydrogen Peroxide (H2O2)|
|4-20 mA Output||No|
|Power Requirements||4 AAA Batteries|