K-9520C Sulfide

Why Choose HR CHEMets kits?

HR CHEMets^®  is the new way to test at high ranges and replaces the now discontinued VACUettes product line. This product's measurement ranges overlaps with the discontinued K-9510C test kit. 

Included:

Method:

The K-9520C Sulfide HR CHEMets® Test Kit (1000-10,000 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): HR CHEMets® Refill, Flat Comparator, 25 mL sample cup, sample cup top, 25 uL fixed volume pipet, pipettor tips, sulfide activator solution, and instructions.

1. Using the syringe provided, obtain 2.5 mL of the sample to be tested, and then dispense it into the empty sample cup.	2. Dilute the contents of the sample cup to the 25 mL mark with distilled water (fig 1).
3. Place the CHEMet ampoule, tip first, into the sample cup. Snap the tip. The ampoule will fill leaving a bubble for mixing (fig 2).	4. To mix the ampoule, invert it several times, allowing the bubble to travel from end to end. Dry the ampoule. Obtain a test result 4 minutes after snapping the tip. Obtain a test result by placing the ampoule between the color standards until the best color match is found (fig. 3).

For more detailed instructions, see the link at the bottom of the page.

More CHEMetrics Kits for Sulfide:

Downloads:

K-9520C Instructions

Safety Data Sheet

Sulfide Tech Sheet

Sulfide Information