Aeroqual Carbon Monoxide (CO) Sensor Head 0-25 ppm (ECM)
Carbon Monoxide (CO) sensor head. Gas Sensitive Electrochemical (GSE) head will measure Carbon Monoxide from 0-25 ppm with a 0.01 ppm resolution providing a <± 10 accuracy.
Carbon Monoxide (CO) sensor head whose Gas Sensitive Electrochemical (GSE) technology will measure Carbon Monoxide from 0-25 ppm with a 0.01 ppm resolution providing <± 10 accuracy (for CO levels between 5-25 ppm) or <± 0.5 ppm (for CO levels between 0-5 ppm).
This head uses an active sensor technology with an internal fan to pull air across the GSE sensor at a specific flow rate for accurate gas detection. This fan will pull a fresh gas stream across the GSE sensor every 60 seconds for accurate Carbon Monoxide detection.
This sensor head will be a direct fit onto any Series-200, Series-300, or Series-500 Aeroqual ozone monitor. This head can be purchased as an addition to your existing monitor, or with a new base unit. To purchase with a base unit see our Aeroqual ozone monitor page. If you currently have an Aeroqual ozone monitor this sensor will be a direct fit for your current monitor. The Series-200, Series-300, or Series-500 will automatically detect this as a 0-25 ppm GSE Carbon Monoxide head and react accordingly.
View a brochure with specifications on the Series-200, 300, and 500.
Detailed Sensor Specifications for Aeroqual ambient sensors
|Call For Price||No|
|Gas||Carbon Monoxide (CO)|
|Sensor Type||GSE (Gas Sensitive Electrochemical)|
|Maximum Exposure||50 ppm|
|Monitor sensor fits||S-200 / S-300 / S-500, Series-900|
|Minimum Detection Limit||0.02 ppm|
|Accuracy||< +/- 0.5 ppm from 0-5 ppm; < +/- 10% from 5-25 ppm|
|Response Time||<60 s|
|Operational Temperature Range||0 to 40 C|
|Operational RH Range||10 to 90%|