Aeroqual Hydrogen Sulfide (H2S) Sensor Head 0-10 ppm (EHS)
Hydrogen Sulfide (H2S) Head uses Gas Sensitive Electrochemical (GSE) technology to detect H2S gas from 0-10 ppm at 0.01 ppm resolution with <±0.05 ppm accuracy (in concentrations from 0 - 0.5 ppm) or <± 10% accuracy (in concentrations from 0.5 -10 ppm.
- SKU
- AQ EHS
Description / Aeroqual Hydrogen Sulfide (H2S) Sensor Head 0-10 ppm (EHS)
Hydrogen Sulfide (H2S) Head uses Gas Sensitive Electrochemical (GSE) technology to detect H2S gas from 0-10 ppm at 0.01 ppm resolution with <±0.05 ppm accuracy (in concentrations from 0 - 0.5 ppm) or <± 10% accuracy (in concentrations from 0.5 -10 ppm).
This head uses an active sensor technology with an internal fan to pull air across the GSE sensor at a specific flow rate for accurate gas detection. The fan pulls a stream of air past the sensor every 30 seconds providing a new reading of H2S levels at a 60 second response time.
This sensor head will be a direct fit onto any Series-200, Series-300, or Series-500 Aeroqual ozone monitor. This head can be purchased as an addition to your existing monitor, or with a new base unit. To purchase with a base unit see our Aeroqual ozone monitor page. If you currently have an Aeroqual ozone monitor this sensor will be a direct fit for your current monitor. The Series-200, Series-300, or Series-500 will automatically detect this as a 0-10 ppm GSE Hydrogen Sulfide head and react accordingly.
Compare the Series 200, 300, 500 monitors:
| Compare the Aeroqual handheld devices |
|
|
|
| Interchangeable sensor head | Yes | Yes | Yes |
| Digital LCD Display | Yes | Yes | Yes |
| Min, Max, Average readings on screen | Yes | Yes | Yes |
| Field Replaceable Battery | Yes | Yes | Yes |
| Remote Sensor Capability | Yes | Yes | Yes |
| Temp and HR Sensor optional | Yes | Yes | Yes |
| External Control Outputs | No | Yes | Yes |
| Audible Alarm | No | Yes | Yes |
| High and Low Alarms | No | Yes | Yes |
| 0-5 VDC Analog output | No | Yes | Yes |
| Zero Calibration capability | Yes | Yes | Yes |
| Span Calibration capability | No | Yes | Yes |
| Internal Data Logging Capability | No | No | Yes |
|
PC connection cables and capability |
No | No |
Yes |
View a brochure with specifications on the Series-200, 300, and 500.
Detailed Sensor Specifications for Aeroqual ambient sensors
Click on image to expand
Sensor Type
There are two types of Aeroqual sensors, type 1 and type 2.
The type 1 is used with the S-200, S-300, S-500, and S-900 monitors.
The type 2 is calibrated specifically with fittings on the end allowing it to be used with the ENC enclosure and in the S930
Full list of technical information and specifications for all Aeroqual sensors
More Information
| Manufacturer | Aeroqual |
|---|---|
| Quickbooks Stock Level | 0.000000 |
| Quickbooks Stock Date Expected | 2024-11-01 00:00:00 |
| Gas | Hydrogen Sulfide (H2S) |
| Sensor Type | GSE (Gas Sensitive Electrochemical) |
| Range | 0-10 ppm |
| Maximum Exposure | 25 ppm |
| Monitor sensor fits | S-200 / S-300 / S-500, Series-900 |
| Minimum Detection Limit | 0.01 ppm |
| Accuracy | < +/- 0.05 ppm (in concentrations from 0 - 0.5 ppm) or <± 10% (in concentrations from 0.5 -10 ppm) |
| Resolution | 0.01 ppm |
| Response Time | <60 s |
| Sampling Method | Fan |
| Operational Temperature Range | 0 to 40 C |
| Operational RH Range | 10 to 90% |
| Warranty | 6 Month |