OEM-2 Ozone Controller
OEM-2 Ozone Controller is great for integrated solutions or use within your ozone generator. A simple and effective method to control ozone levels, or shut down equipment in the event of an ozone leak. Available range of 0-0.1ppm.
The OEM-2 is a 12/24 VDC powered board that offers a 4-20 mA output.
For reference, the OEM-1 is a 120 VAC powered device that offers a 0-1 VDC output.
- Buy 5 for $295.00 each and save 9%
- Buy 10 for $245.00 each and save 25%
- 1-4 = $325 each
- 5-9 = $295 each
- 10+ = $245 each
Call for quantity discounts
The model OEM-2 is a system to control ozone generators and alarms based on an adjustable ozone concentration set point. It is designed to work with plug-in sensor modules for 0-0.1 ppm. These are specified when ordering by putting the ppm range after the model number. For example, a 0.1 ppm OEM-2 board system would be OEM-2-.1 and the replacement sensor module for it would be SM-1-.1. These same sensor modules also work in our OEM-1 boards, which have features such as being powered by 110/220 VAC. The sensors modules can also be located at a distance from the OEM-2 boards by 2 or 8 meter cables. These are readily available DIN M/F 5 pin extension cables.
One component of the OEM-2 system is the base board which incorporates the power supply, final signal processing, set-point controls, and the output relay. The other component is the sensor mounted with its associated electronics in a cylindrical DIN plug. This is pre-calibrated in our lab so that the sensor module and main board module together work as a calibrated system. If the sensor module is damaged, it is simply replaced by another precalibrated module.
|Call For Price||No|
|Response Time||8 seconds|
|Sensor type||Heated Metal Oxide (HMOS)|
|Alarms||NO/NC relay for control purposes|
|Operational Temperature Range||35 - 100 deg F|
|Operational RH Range||0 - 85% RH|
|Power Requirements||12 VDC|
|Field Replaceable Battery||No|