Aeroqual Ozone (O3) Sensor Head 0-0.5 ppm (OZL)
The Aeroqual 0-0.5 ppm Ozone Sensor Head is designed to provide accurate, consistent readings of the ozone in your ambient airspace. For workplace safety, the OZL sensor head is the perfect option as it will accurately and reliably measure ozone up to 0.5 ppm.
Ozone (O3) sensor head. Gas Sensitive Semiconductor (GSS) head will measure Ozone gas from 0-0.5 ppm with a 0.001 ppm resolution. This is the perfect head for measuring low levels of ozone up to 0.5 ppm. The OZL head is the perfect head for measuring ozone at or near the human safety thresholds of 0.1 to 0.3 ppm.
This sensor uses an active sensor technology with an internal fan to pull air across the GSS sensor at a specific flow rate for accurate gas detection. This fan will pull a fresh gas stream across the GSS sensor every 60 seconds for accurate Ozone detection in most every environment.
This sensor head will be a direct fit onto any Series-200, Series-300, or Series-500 Aeroqual ozone monitor. This head can be purchased as an addition to your existing monitor, or with a new base unit. To purchase with a base unit see our Aeroqual ozone monitor page. If you currently have an Aeroqual ozone monitor this sensor will be a direct fit for your current monitor. The Series-200, Series-300, or Series-500 will automatically detect this as a 0-10 ppm Chlorine head and react accordingly.
View a brochure with specifications on the Series-200, 300, and 500.
Detailed Sensor Specifications for Aeroqual ambient sensors
|Call For Price||No|
|Sensor Type||GSS (Gas Sensitive Semiconductor)|
|Maximum Exposure||1.0 ppm|
|Monitor sensor fits||S-200 / S-300 / S-500, Series-900|
|Minimum Detection Limit||0.001 ppm|
|Accuracy||< +/- 10 %|
|Response Time||<60 s|
|Operational Temperature Range||0 to 40 C|
|Operational RH Range||10 to 90%|